|
 Model: ATX-750N
| Premium 750W |
Ultra Quiet
ATX
12V Power Supply
|
|
|
|
Question: What's Fan
Speed Monitor?
Answer:
The 3-pin Fan
Speed Monitor connector looks like a standard 3pin case fan
connector. When it is connected to an available fan port on the
motherboard, provides real time rotational speed of the power
supply fan to the
system. This
feature provides an added level of security alarm to the system.
In the event that the power supply's fan failure, the system can now be
programmed to shut down immediately or sound an alarm. Most
motherboard has at least one extra 3-pin fan connector port in
addition to the standard CPU fan connector. Fan Speed Monitor
connector
does not have to be connected to the motherboard in order for the power
supply fan to work. This power supply has a fan speed controller
with built-in
temperature sensor.
|
Ultra low noise performance
without
the high cost of fanless model.
|
NEW Better
Mechanical Design:
Special ultra-quiet 120mm
fan
(built-in thermostat controlled) draws
massive
amounts of hot air in from the CPU into the
power supply and exits out the back of the PC. Circular
tube design fan-guard
generates
less drag and increase overall
airflow.
|
Additional Mechanical Design Advancement:
- Honey-comb rear vent structure for improved ventilation.
- Round circular tube fan guard generates less drag, noise, and
provides more overall airflow.
- Patented EZ-Extract power connectors allow you to unplug at ease without hurting your fingers.
|
- High voltage spike testing on
every unit:
Each
unit is verfied for safety by going through a thorough HI-POT test. For example, 1,500 Volt AC
spike is introduced at each unit for up to 60 seconds under
10mA. Each unit is then serialized for product quality
tracking.
- Wide AC Range
Line Regulation
Stable
DC output voltage on all rails is consistently maintained even when AC
voltage level is reduced during the hotest days and nights. Do you
know that many utility companies often have to reduce AC
voltage to compensate for high electrical demand ?
Output
Power
Distribution Table
|
AC INPUT
|
115V/230V -
60/50Hz
|
|
DC OUTPUT
|
+3.3V
|
+5V
|
+12V1
|
+12V2
|
-12V
|
+5VSB
|
|
750W
|
Peak
Combined
Watts
|
25A
|
25A
|
25A
|
25A
|
0.3A
|
2.5A
|
|
750W
|
+12V1 & +12V2 combined peak output
is 552W
Operating
temperature
range: 10oC
-
45oC (50oF - 113oF)
Operating
relative humidity range: 20 to
90%
Energy-efficient:
typical
84%, average
81.94% efficiency
MTBF
Life
Expectancy of this model: 100,000
hours*
(11
years
&
2 months)
* Excludes the life of the fan which may
vary depending on operating
environment
- Safe to Operate. Safe to the Environment.
Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE
RoHS
Compliant - made with hazardous-free components
|
Complete
6*StarTM
system
protection
|
- Over Voltage Protection
- Under Voltage Protection
- Over Current Protection
|
- Short Circuit Protection
- Over Power Protection
- Over Temperature Protection
|
(1) 20+4pin Main Power Connector (supports both 20 & 24pin motherboards)
(1) 2x2 4-pin ATX 12V Power Connector (1) Extra Long 6pin PCI-Express Power Connector Cable, 18.5 inch (469 mm) (1) Floppy Drive Power Connector
(1) 8-pin Intel i7 / Xeon 12V Power Connector Adapter
(5) 4-pin Molex Peripheral Power Connector
Patented EZ-Extract
(squeeze-and-pull) Design
|
 |
(2) Right-angle SATA Power Connectors
Reach any drive even in tight spot
|
|
(1) 3-pin Fan Speed Monitor Connector
When connected to a
fan connector on the motherboard, reports power supply's fan
speed RPM in real-time to the system
|
|
|
USD$ 99.99
|
|
|
|
